Friday, April 10, 2020

HOW TO UPDATE ANDROID 8227L STEREO



📁📻HOW TO UPDATE ANDROID 8227L STEREO📻📁


This is for those who have a ( 8227l ) android stereo and are looking for the update file zip. Also the mcu in the about phone menu should begin with ts .  I have 5 files from jby tech, they are the  Amazon seller of my hizpo android 8.1 stereo unit. From lots of research and emails to the company, i found that these Android stereos come in many brand names but run the same 8227l system. Another company with the same unit is joying but the device name is different along with the entire UI. Please do be sure you have a 8227l unit before proceeding. Other updates for other brands can be found on google and xda forum. I will try to remember to put link for xda forum. Below I have listed 2 groups of files. One is for touch screen only android stereo and the other is for touch screen with volume knob. Please choose according to your type of stereo. And follow the steps below exactly.

 1. Download proper zip for your device. 



2. Extract the 2 files from within the zip folder. 



3. Copy & paste the ( .bin ) & other file on to a blank sd card or usb flash drive. Make sure these are the only 2 files on the sd card or flash drive. 



4. With stereo unit powered off insert the sd card or usb flash drive and power on stereo. (Note some units will recognize the file immediately during boot, and others will prompt you after loading main screen. If unit does not recognize it, power off for 40sec and when u power on tap the screen in middle repeatedly with finger until the word "detected" shows in green.

 If it gives a message in red saying failed please check you have good download copy and have followed the instructions exactly & RETRY.


The files below this line are for android 6os, 7os, 8.1os 8227l units with a volume knob 
(If You Have All Touch Stereo Your Files Needed Are Below in group#2)

GROUP#1
Stock Android 7.1 firmware:




Here is another version for this unit that is stock Android 6,7os but felt like it had a low resolution not for certain, but is safe to install in case base version still isnt a match for your unit:

Android 7.1a V63
Android 7.1b v67
____________________________________
GROUP#2

The files below are for the "TOUCH" only Android 9os 8227l units with touch back, home, vol -/+ buttons.

NOTE
*** I have installed them on the non-touch only unit and it will work but not allow volume knob to work, and will display " Activation code does not match " ***


Stock android 9.0a (Touch) firmware version 1:

Stock android 9.0b (Touch) firmware version 2:









59 comments:

  1. Hi.tanks for update. I've the same fake 8.1 Android of your vidéo. It working notre to bad except radio memories and rds fixe. Please, have you made the fixe problème radio in the flash firmware ? Tank you in advance.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. comment on the youtube video channel please

    ReplyDelete
  4. hello i have hizpo android 10 - 8227l alps
    Model FF-5000, but the specification shows me Android 8, how I can adjust the software, and which version is suitable for my system, thanks in advance.

    ReplyDelete
  5. Hola tengo autoradio 8227_demo estaba em andriod 10 de 4Gran y 32 GB flash pero de casualidad se restableció de fabrica y volvió a andrio 8.1go como puedo actualizarlo a Android 10 . Envieme como actualizarlo x favor .al
    mora1522cheves@gmail.com

    ReplyDelete
  6. Hi, I saw the message '' device not activated '' , how to solve this problem, and radio tuner not working, And how I do a hard reset

    ReplyDelete
  7. Hi, do these firmwares add RDS mode to the radio?
    Thx

    ReplyDelete
  8. Not detected by my system in any way

    ReplyDelete
  9. Are there any changelog for this? where are those infos?

    ReplyDelete
  10. HI , Can you please help with the DSP version of the firmware ?

    ReplyDelete
  11. Is there any Turkish language support?

    ReplyDelete
  12. Is there any Turkish language support?

    ReplyDelete
  13. Olá tenho um auto radio ANDROID 9.0 (8227L ESTÉREO) é possível mudar para android 10?

    Desde já agradeço abraço.

    ReplyDelete
  14. Hi guys, it is posible to use same update for my Radio?

    Android: YT9216B_00002_V004_20190728
    System-version: Android 8.1 Go XY AUTO: 3.0
    CAN BUS 3.0 (8227L)
    CPU-Typ: A7 1.3 GHz x 4
    Auflösung : 1024*600
    MCU1: 3.1 (8227L)
    Kernel-Version: 3.18.22 gangli@zx-PowerEdge-R730#19 Sun Jul28 12:15:53 CST 2019
    Build-Nummer: android-trunk-m0.AC8227L-V1.0

    ReplyDelete
    Replies
    1. yes you can contact me on whatsapp +923339228848

      Delete
    2. Hello. What's the newest for android-trunk-m0.AC8227L-V1.0? Greetings.

      Delete
    3. send me your hu home and info systam pics? on my whatsapp +923339228848

      Delete
  15. I have an android head unit 6.0, tried upgrading using the above file it does not work for me. any suggestions.

    I have lost the sound of the device, only Radio sound is working.

    ReplyDelete
  16. What about update for Android 10 for 8227l

    ReplyDelete
  17. What about update for Android 10 for 8227l

    ReplyDelete
  18. What about update for Android 10 for 8227l

    ReplyDelete
  19. hello all contact me on my whatsapp +923339228848 i have many updates.
    Rizwan

    ReplyDelete
    Replies
    1. Hello Please can you show me link to download roms for my alps 8227l_demo

      Delete
    2. did you contact me on my whatsaap??????

      Delete
  20. hOLA, SE INSTALAS PERO LAS PANTALLA SE VE MUY GRANDE COMO PUEDO ARREGLAR LA RESOLUCION? MI PANTALLA ES DE 6.2"

    ReplyDelete
  21. hi do any of you have true android 10 update for yt9216cj ?

    ReplyDelete
  22. Thank you so much. I have reinstalled android 8.1 with success. Not many changes... Launcher is updated ....

    ReplyDelete
  23. later: I installed also version " Stock android 9.0b (Touch) firmware" to knob volume and buttons version and works okay! Vol and buttons are usable and no error about registering device.
    The UI looks beautiful than 8.1.
    DAB+ , Torque apps are installed.

    ReplyDelete
  24. Hello. What's the newest for android-trunk-m0.AC8227L-V1.0? Greetings.

    ReplyDelete
  25. Hi I have a 8227L demo running 8.1 go however none of the links above work on my headset. I transferred the files onto a flash drive, plugged it into the unit, and the unit says 'unrecognised file type'. Thanks in advance

    ReplyDelete
  26. The Android Trouble Shooter,contact me: whatsapp or wechat = +923339228848.



    Donation welcomed

    ReplyDelete
  27. Hi there I have updated the files above which is functional work fine. But unfortunatly the device has no sound at all.

    ReplyDelete
  28. headunit 822l v8.0 fm radio not work

    ReplyDelete
  29. Does anyone know the password to hard reset the unit , help please

    ReplyDelete
  30. Here is android 9 files, i have hizpo with volume knob and buttons and all verions worked perfectly for me even if software was for touch!Radio, rds ... all works.
    8227L_8腾实UI02-国外10_v21_20200528
    https://mega.nz/file/qf5kTDBZ#VkQsDU27DZkhWjRZZOS53FK_eFYLR-PtmP40tmfuEdA

    ReplyDelete
    Replies
    1. Hello! Thanks for the link! But I am reluctant in proceeding with the update, since I'm not sure if it works for my version: yt9216c_ahd_00005_v004_20200313_hifi
      Thank you!

      Delete
    2. Have to mention that I don't have the volume knob, but since you said that is working...

      Delete
  31. Die Haupteinheit ZXDZ-01, ein Prozessor MT / AS8227L (Andriod 8.1)

    (Andriod 8.1)

    https://drive.google.com/file/d/1O4wKfnEHekGJMhydAOzWkPbZHIX510Zx/view

    https://4pda.to/forum/index.php?showtopic=966510

    ReplyDelete
  32. Geesonic 8227L 8.1 android update version 9.1 need how to download FireWire

    ReplyDelete
  33. Sir I have Geesonic 8227L_ demo model 8.1 android version canpro 3.0 (822L) how to i updated android 9 or android 10 version please send me link.in my steyem is UP_Ul06_F27LJ_00009_V001_20200320

    ReplyDelete
    Replies
    1. Kildy send me the like how to update and install the software

      Delete
    2. Give message thani.vpg@gmail.com

      Delete
    3. me too sir.... rosmawwar@gmail.com.... i've already subscribe n like your youtube channel also

      Delete
  34. Can you reupload the files, the link files seems to have broken

    ReplyDelete